Tel: 01785 785 680 | Email: enquiries@rivercanalrescue.co.uk

BILGEAWAY

Clean Bilge > Healthy Habits

The BilgeAway filter is the world’s first truly environmentally-friendly hydrocarbon filtration solution. Designed to extract hydrocarbon contamination (petrol, diesel, engine oil, etc) from water, BilgeAway removes hydrocarbon content and renders the hydrocarbons non-reactive (non-harmful).

This is a global first because while other filter systems trap hydrocarbons, they fail to de-contaminate them, and only act as a barrier to pumping hydrocarbons overboard. Once the filter’s blocked/ fully used, the damaging hydrocarbons contained within it must be disposed of. Traditional filters typically transfer the problem to a landfill site, where contaminants can re-enter the environment.

BilgeAway renders hydrocarbons non-reactive, meaning that for the life of the hydrocarbon it cannot damage the environment. The filter media can even be composted once used, giving environmental peace of mind.

BilgeAway is designed for use with standard bilge water contamination levels. It is not intended to deal with bilge areas that are subject to major hydrocarbon leakage (fuel/oil leak). the 10 inch filter max capacity is 0.45 litres of hydrocarbon. Once this limit is exceeded, hydrocarbons will pass through the filter untreated. Major hydrocarbon leaks should be dealt with separately and the filter cartridge replaced after any incident.

The filter has been extensively tested with canal, river and ocean based waters to ensure blockages do not occur. However, if bilge area’s significantly contaminated with large amount of debris, sediment or biomass, then blocking may occur. Situate the bilge pump in an area free from large debris or where large quantities of debris may collect.

To visit our Bilgeaway site please click the button below